fit-python-sdk - GitLite

KO | EN

gitlite — search

#python #ai #go #android #machine-learning #linux #docker #nodejs #windows #awesome #pytorch #security #ios #open-source

fit-python-sdk

(★ 158)

Official Garmin FIT Python SDK

파일 탐색기

최종 버전 다운로드 (.zip)

- - publish.yml
  - run_tests.yml
- CODEOWNERS
- __init__.py
- __init__.pyi
- accumulator.py
- accumulator.pyi
- bitstream.py
- bitstream.pyi
- crc_calculator.py
- crc_calculator.pyi
- decoder.py
- decoder.pyi
- encoder.py
- encoder.pyi
- fit.py
- fit.pyi
- hr_mesg_utils.py
- hr_mesg_utils.pyi
- mesg_definition.py
- mesg_definition.pyi
- mesgs.pyi
- output_stream.py
- profile.py
- profile.pyi
- py.typed
- stream.py
- stream.pyi
- types.pyi
- util.py
- util.pyi
- - ActivityDevFields.fit
  - HrmPluginTestActivity.fit
  - WithGearChangeData.fit
- __init__.py
- data.py
- data_expand_hr_mesgs.py
- test_accumulator.py
- test_bitstream.py
- test_crc_calculator.py
- test_decoder.py
- test_encode_activity_recipe.py
- test_encoder.py
- test_hr_mesg_utils.py
- test_mesg_definition.py
- test_output_stream.py
- test_stream.py
- test_util.py
pyproject.toml
README.md

# 설치 가이드

1. 코드 내려받기

git clone https://github.com/garmin/fit-python-sdk

깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.

cd fit-python-sdk

방금 내려받은 프로젝트 폴더 안으로 이동합니다.

2. 공식 설치 스크립트

쉬움 추천

사전 준비물

Python 3 pip 명령어를 쓰려면 Python이 필요합니다.

pip install garmin-fit-sdk

PyPI에 배포된 패키지를 바로 설치합니다. 소스 클론이 필요 없습니다.

✅ 설치 후 새 터미널을 열고, 프로그램의 버전 확인 명령(예: --version)으로 정상 설치됐는지 확인하세요.

이 레포의 README에 적힌 실제 명령어를 그대로 가져왔습니다.

3. Python

쉬움

사전 준비물

Git GitHub에서 프로젝트 코드를 내려받으려면 필요합니다.
Python 3 설치 시 'Add Python to PATH' 옵션을 꼭 체크하세요 (Windows).

pip install garmin-fit-sdk

PyPI에 배포된 패키지를 바로 설치합니다. 소스 클론이 필요 없습니다.

✅ 에러 메시지 없이 실행되고 터미널에 안내 문구가 출력되면 정상입니다.

이 레포의 README에 적힌 실제 명령어를 그대로 가져왔습니다.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Garmin - FIT Python SDK

## FIT SDK Documentation
The FIT SDK documentation is available at [https://developer.garmin.com/fit](https://developer.garmin.com/fit).
## FIT SDK Developer Forum
Share your knowledge, ask questions, and get the latest FIT SDK news in the [FIT SDK Developer Forum](https://forums.garmin.com/developer/).

## FIT Python SDK Requirements
* [Python](https:##www.python.org/downloads/) Version 3.6 or greater is required to run the FIT Python SDK

## Install
The FIT Python SDK is published to PyPi as [garmin-fit-sdk](https://pypi.org/project/garmin-fit-sdk/) and can be installed using pip.
```sh
pip install garmin-fit-sdk
```

## Usage
```py
from garmin_fit_sdk import Decoder, Stream

stream = Stream.from_file("Activity.fit")
decoder = Decoder(stream)
messages, errors = decoder.read()

print(errors)
print(messages)
```

## Decoder

### Constructor

Creating Decoder objects requires an input Stream representing the binary FIT file data to be decoded. See [Creating Streams](#creatingstreams) for more information on constructing Stream objects.

Once a Decoder object is created it can be used to check that the Stream is a FIT file, that the FIT file is valid, and to read the contents of the FIT file.

### is_fit Method

All valid FIT files should include a 12 or 14 byte file header. The 14 byte header is the preferred header size and the most common size used. Bytes 8-11 of the header contain the ASCII values ".FIT". This string can easily be spotted when opening a binary FIT file in a text or hex editor.

```
  Offset: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000: 0E 10 43 08 78 06 09 00 2E 46 49 54 96 85 40 00    ..C.x....FIT..@.
00000010: 00 00 00 07 03 04 8C 04 04 86 07 04 86 01 02 84    ................
00000020: 02 02 84 05 02 84 00 01 00 00 19 28 7E C5 95 B0    ...........(~E.0
```

### check_integrity Method

The checkIntegrity method performs three checks on a FIT file:

1. Checks that bytes 8-11 of the header contain the ASCII values ".FIT".
2. Checks that the total file size is equal to Header Size + Data Size + CRC Size.
3. Reads the contents of the file, computes the CRC, and then checks that the computed CRC matches the file CRC.

A file must pass all three of these tests to be considered a valid FIT file. See the [IsFIT(), CheckIntegrity(), and Read() Methods recipe](/fit/cookbook/isfit-checkintegrity-read/) for use-cases where the checkIntegrity method should be used and cases when it might be better to avoid it.

#### Read Method
The Read method decodes all messages from the input stream and returns an object containing a list of errors encountered during the decoding and a dictionary of decoded messages grouped by message type. Any exceptions encountered during decoding will be caught by the Read method and added to the list of errors.

The Read method accepts an optional options object that can be used to customize how field data is represented in the decoded messages. All options are enabled by default. Disabling options may speed up file decoding. Options may also be enabled or disabled based on how the decoded data will be used.

```py
messages, errors = read(
            apply_scale_and_offset = True,
            convert_datetimes_to_dates = True,
            convert_types_to_strings = True,
            enable_crc_check = True,
            expand_sub_fields = True,
            expand_components = True,
            merge_heart_rates = True,
            mesg_listener = None)
```
#### mesg_listener
Optional callback function that can be used to inspect or manipulate messages after they are fully decoded and all the options have been applied. The message is mutable and will be returned from the Read method in the messages dictionary.

Example mesg_listener callback that tracks the field names across all Record messages.

```py
from garmin_fit_sdk import Decoder, Stream, Profile

stream = Stream.from_file("Activity.fit")
decoder = Decoder(stream)

record_fields = set()
def mesg_listener(mesg_num, message):
    if mesg_num == Profile['mesg_num']['RECORD']:
        for field in message:
            record_fields.add(field)

messages, errors = decoder.read(mesg_listener = mesg_listener)

if len(errors) > 0:
    print(f"Something went wrong decoding the file: {errors}")
    return

print(record_fields)
```

#### apply_scale_and_offset: true | false
When true the scale and offset values as defined in the FIT Profile are applied to the raw field values.
```py
{
  'altitude': 1587 ## with a scale of 5 and offset of 500 applied
}
```
When false the raw field value is used.
```py
{
  'altitude': 10435 ## raw value stored in file
}
```
#### enable_crc_check: true | false
When true the CRC of the file is calculated when decoding a FIT file and then validated with the CRC found in the file. Disabling the CRC calculation will improve the performance of the read method.
#### expand_sub_fields: true | false
When true subfields are created for fields as defined in the FIT Profile.
```py
{
  'event': 'rear_gear_change',
  'data': 16717829,
  'gear_change_data':16717829 ## Sub Field of data when event == 'rear_gear_change'
}
```
When false subfields are omitted.
```py
{
  'event': 'rearGearChange',
  'data': 16717829
}
```
#### expand_components: true | false
When true field components as defined in the FIT Profile are expanded into new fields. expand_sub_fields must be set to true in order for subfields to be expanded

```py
{
  'event': 'rear_gear_change'
  'data': 16717829,
  'gear_change_data':16717829, ## Sub Field of data when event == 'rear_gear_change'
  'front_gear': 2, ## Expanded field of gear_change_data, bits 0-7
  'front_gear_num': 53, ## Expanded field of gear_change_data, bits 8-15
  'rear_gear': 11, ## Expanded field of gear_change_data, bits 16-23
  'rear_gear_num': 1, ## Expanded field of gear_change_data, bits 24-31
}
```
When false field components are not expanded.
```py
{
  'event': 'rear_gear_change',
  'data': 16717829,
  'gear_change_data': 16717829 ### Sub Field of data when event == 'rear_gear_change'
}
```
#### convert_types_to_strings: true | false
When true field values are converted from raw integer values to the corresponding string values as defined in the FIT Profile.
```py
{ 'type':'activity'}
```
When false the raw integer value is used.
```py
{ 'type': 4 }
```
#### convert_datetimes_to_dates: true | false
When true FIT Epoch values are converted to Python datetime objects.
```py
{ 'time_created': {Python datetime object} }
```
When false the FIT Epoch value is used.
```py
{ 'time_created': 995749880 }
```
When false the Util.convert_timestamp_to_datetime method may be used to convert FIT Epoch values to Python datetime objects.
#### merge_heart_rates: true | false
When true automatically merge heart rate values from HR messages into the Record messages. This option requires the apply_scale_and_offset and expand_components options to be enabled. This option has no effect on the Record messages when no HR messages are present in the decoded messages.

## Creating Streams
Stream objects contain the binary FIT data to be decoded. Streams objects can be created from bytearrays, BufferedReaders, and BytesIO objects. Internally the Stream class uses a BufferedReader to manage the byte stream.

#### From a file
```py
stream = Stream.from_file("activity.fit")
print(f"is_fit: {Decoder.is_fit(stream)}")
```
#### From a bytearray
```py
fit_byte_array = bytearray([0x0E, 0x10, 0xD9, 0x07, 0x00, 0x00, 0x00, 0x00, 0x2E, 0x46, 0x49, 0x54, 0x91, 0x33, 0x00, 0x00])
stream = Stream.from_byte_array(fit_byte_array)
print(f"is_fit: {Decoder.is_fit(stream)}")
```
#### From a BytesIO Object
```py
fit_byte_bytes_io = io.BytesIO(bytearray([0x0E, 0x10, 0xD9, 0x07, 0x00, 0x00, 0x00, 0x00, 0x2E, 0x46, 0x49, 0x54, 0x91, 0x33, 0x00, 0x00]))
stream = Stream.from_byte_io(fit_byte_bytes_io)
print(f"is_fit: {Decoder.is_fit(stream)}")
```
#### From a buffered_reader
```py
fit_buffered_reader = io.BufferedReader(io.BytesIO(bytearray([0x0E, 0x10, 0xD9, 0x07, 0x00, 0x00, 0x00, 0x00, 0x2E, 0x46, 0x49, 0x54, 0x91, 0x33, 0x00, 0x00])))
stream = Stream.from_buffered_reader(fit_buffered_reader)
print(f"is_fit: {Decoder.is_fit(stream)}")
```

## Util
The Util object contains both constants and methods for working with decoded messages and fields.
### FIT_EPOCH_S Constant
The FIT_EPOCH_S constant represents the number of seconds between the Unix Epoch and the FIT Epoch.
```py
FIT_EPOCH_S = 631065600
```
The FIT_EPOCH_S value can be used to convert FIT Epoch values to Python datetime objects.
```py
python_date = datetime.datetime.fromtimestamp(fitDateTime + FIT_EPOCH_S, datetime.UTC)
```
### BASE_TYPE_TO_FIELD_TYPE Constant
`BASE_TYPE_TO_FIELD_TYPE` is a dictionary that maps FIT base type values to their corresponding field type name strings as defined in the FIT Profile.
```py
field_type_string = BASE_TYPE_TO_FIELD_TYPE[base_type_value]
# e.g. BASE_TYPE_TO_FIELD_TYPE[BASE_TYPE['UINT32']] == 'uint32'
```
### FIELD_TYPE_TO_BASE_TYPE Constant
`FIELD_TYPE_TO_BASE_TYPE` is the inverse mapping of `BASE_TYPE_TO_FIELD_TYPE`. It maps FIT field type name strings to their corresponding base type values as defined in the FIT Profile.
```py
base_type_value = FIELD_TYPE_TO_BASE_TYPE[field_type_string]
# e.g. FIELD_TYPE_TO_BASE_TYPE['uint32'] == BASE_TYPE['UINT32']
```
### convert_timestamp_to_datetime Method
A convenience method for converting FIT Epoch values to Python Datetime objects.
```py
python_date = convert_timestamp_to_datetime(fit_datetime)
```
### convert_datetime_to_timestamp Method
A convenience method for converting Python Datetime objects to FIT Epoch values.
```py
fit_datetime = convert_datetime_to_timestamp(python_date)
```

## Encoder
### Usage
```py
from datetime import datetime, timezone

from garmin_fit_sdk import Encoder, Profile

encoder = Encoder()

# Pass the MesgNum and message data as separate parameters to the onMesg() method
encoder.on_mesg(Profile['mesg_num']['FILE_ID'], {
    'manufacturer': 'development',
    'product': 1,
    'time_created': datetime.now(tz=timezone.utc),
    'type': 'activity',
})

# The writeMesg() method expects the mesgNum to be included in the message data
# Internally, writeMesg() calls onMesg()
encoder.write_mesg({
    'mesg_num': Profile['mesg_num']['FILE_ID'],
    'manufacturer': 'development',
    'product': 1,
    'time_created': datetime.now(tz=timezone.utc),
    'type': 'activity',
})

# Unknown values in the message will be ignored by the Encoder
encoder.on_mesg(Profile['mesg_num']['FILE_ID'], {
    'manufacturer': 'development',
    'product': 1,
    'time_created': datetime.now(tz=timezone.utc),
    'type': 'activity',
    'customField': 12345, # This value will be ignored by the Encoder
})

# Subfield values in the message will be ignored by the Encoder
encoder.on_mesg(Profile['mesg_num']['FILE_ID'], {
    'manufacturer': 'development',
    'product': 4440, # This is the main product field, which is a uint16
    'garmin_product': 'edge_1050', # This value will be ignored by the Encoder, use the main field value instead
    'time_created': datetime.now(tz=timezone.utc),
    'type': 'activity',
})

uint8_array = encoder.close()

# Write the bytes to a file
with open('example.fit', 'wb') as f:
    f.write(uint8_array)
```
See the [Encode Activity Recipe](https://github.com/garmin/fit-python-sdk/blob/main/tests/test_encode_activity_recipe.py) for a complete example of encoding a FIT Activity file using the FIT Python SDK.