home-remote

KO | EN

gitlite — search

#ai #typescript #llm #deep-learning #macos #awesome #cli #kubernetes #awesome-list #vue #security #ios #openai #open-source

(★ 77)

An EspHome based remote control for Home Assistant

파일 탐색기

최종 버전 다운로드 (.zip)

- back.jpeg
- front.jpeg
- side.jpeg
home-remote.yaml
LICENSE
README.md

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# home-remote

I have used the FireBeetle ESP32 board along with a LiPo cell to power the device. Modify the code to fit your needs.

## Recent changes
1. Added battery monitoring
2. Added WiFi singal strength indicator
3. Added battery charging indicator
4. Added auto sleep feature

## Future goals
1. Case
2. Custom PCB design
3. Wireless charging

## Configuration

I have added subtitutions for all the entities so that it is much easier to get everything up and running. The remote currently consists of 3 pages: Lights, Home page and Media. Edit the entitiy ids to suit your setup.

### Lights

Currently you can add 4 lights.
 
![lights](https://user-images.githubusercontent.com/61015809/184081712-5a653ab1-6741-4ff8-bec6-be3b27e2e11e.jpg)

```
#Lights
#Entity ids for lights
  light_1: light.bedroom_lamp 
  light_2: light.bathroom_bulb 
  light_3: light.kitchen_bulb 
  light_4: light.living_room_bulb
#Titles for lights
  light_1_title: Bedroom 
  light_2_title: Bathroom 
  light_3_title: Kitchen 
  light_4_title: Livingroom    
}
```

### Home

Add a temprature sensor and weather enitiy. The scenes are handled by an input select that contains all the scenes.

![home](https://user-images.githubusercontent.com/61015809/184081731-b45fa0ca-5625-4151-a029-35d6c25867c7.jpg)

```
#Home page
  temprature_sensor: sensor.bathroom_temperature 
  weather: weather.home

scenes: input_select.scenes
```

### Media

Almost any media player in home assistant should work.
 
![media](https://user-images.githubusercontent.com/61015809/184081761-c170ef2b-8aae-4c12-a11a-e940b22eac93.jpg)

```
#Media
  media: media_player.adityas_bedroom
```
### Fonts

Place all the fonts in "fonts" folder inside the esphome folder.
 
## Wiring

### Buttons:
 I have used the internal pull-up feature of the ESP32 to minimise the number of components and the complexity of the circuit. Connect one end of the button to ground and the other end to the corresponding pin.
 
|    GPIO PIN   |    Button  |
| ------------- | ------------- |
| 23  | Up    |
| 27  | Down  |
| 25  | Right |
| 19  | Left  |
| 26  | Ok    |
| 03  | Home  | 
| 18  | Lights|
| 13  | Media |
| 36  | Battery voltage  |
| 14  | Battery charging |

Pressing the 'Ok' button wakes up the device and long pressing the 'Home' button puts the device to sleep.
 
### Battery:
 I have used a 1000 mAh LiPo battery directly connected to the FireBeetle board. The board comes with built in battery protection circuit. Connect a potential divider of value 100K and 220K to the battery to read battery voltage. The charger pin can be connected to pin 14 to read the charging state.
 
## Support

Your support will help me make more cool projects just like this one :-)

home-remote

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

home-remote

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README