turing-pi-scripts - GitLite

KO | EN

gitlite — search

#postgresql #kotlin #windows #cross-platform #agents #ai-agents #animation #nlp #vue #claude

turing-pi-scripts

(★ 31)

Miscellaneous scripts for my Turing Pi setup. Turn on and off all nodes with a command or power button and have a power LED.

파일 탐색기

ZIP 다운로드

- changelog
- compat
- control
- copyright
- install
- rules
- pinout.png
- turing-pi.jpg
config.txt
LICENSE
listen-for-shutdown.py
listen-for-shutdown.service
nodes.cfg
package.yml
README.md
turn-off-nodes.sh
turn-on-nodes.service
turn-on-nodes.sh

# CDN으로 사용하기

jsDelivr

jsDelivr는 공개 GitHub 리포지토리를 별도 설정 없이 CDN으로 즉시 서빙합니다. 버전과 파일을 고르면 웹페이지에 바로 붙일 수 있는 링크와 예시 코드가 만들어집니다.

버전

파일

링크

예시

명령어 용어집

이 문서에서 사용된 명령어를 모아봤습니다. 낯선 명령어가 있다면 펼쳐서 확인해보세요.

🔍

`git clone`

설명 보기 ▼

Clone an existing repository.

git clone {{remote_repository_location}} {{path/to/directory}}

Clone an existing repository into a new directory (the default directory is the repository name):

git clone --recursive {{remote_repository_location}}

Clone an existing repository and its submodules:

git clone {{[-n|--no-checkout]}} {{remote_repository_location}}

Clone only the `.git` directory of an existing repository:

🔍

`nano`

설명 보기 ▼

명령줄 텍스트 편집기. 향상된 `Pico` 클론.
관련 항목: `pico`, `rnano`.
더 많은 정보: <https://nano-editor.org/dist/latest/nano.html>.

nano {{path/to/file1 path/to/file2 ...}}

편집기 시작:

nano {{[-I|--ignorercfiles]}}

설정 파일을 사용하지 않고 편집기 시작:

nano +{{line}},{{column}} {{path/to/file}}

특정 파일 열기, 이전 파일을 닫으면 다음 파일로 이동:

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Miscellaneous scripts for my [Turing Pi](https://turingpi.com/) setup. Turn on and off all nodes with a command or power button and have a power LED.

<p align="center"><img src="https://github.com/nicholaswilde/turing-pi-scripts/raw/develop/images/turing-pi.jpg" width="600"></p>

> :warning: **WARNING**:The register which controls the power to each board is backed by an EEPROM. Don't set all bits in there to 0, otherwise you won't be able to boot and correct it. A fix is to set register 0xF4 to 1 which would send the writes to the shadow SRAM, instead of the EEPROM. A fix for this is to connect an external raspberry pi to the I2C External pins and reset the registers. |

| Script | Function |
| --- | --- |
| `turn-on-nodes.sh` | Turns all nodes on via the CMB |
| `turn-off-nodes.sh` | Turns off all nodes via the CMB |
| `turn-on-nodes.service` | systemd service file to run turn-on-nodes.sh at boot |
| `listen-for-shutdown.py` | Listen for when the power button is held for 2 seconds and turn off the Turing Pi |
| `listen-for-shutdown.service` | systemd service file to start listen-for-shutdown.py at boot |

## Notes
- The power LED will blink a few times when holding the power button down for two seconds. All worker nodes will turn off first and a normal shutdown node will be ran on the master node.
- The power LED will stay on until the master node shuts down completely. 
- Once the power LED turns off, the power button can then be pressed to turn on the master node which will then turn on the worker nodes.

## Prerequisites
```bash
# turn-on-nodes.sh and turn-off-nodes.sh
$ sudo apt-get update
$ sudo apt-get install i2c-tools

# listen-for-shutdown.py
$ sudo apt-get install python3
$ sudo apt-get install python3-gpiozero
```

## Installation
On your master node:
```bash
$ cd ~
$ mkdir git
$ cd git
$ git clone https://github.com/nicholaswilde/turing-pi-scripts.git
$ cd turing-pi-scripts
$ chmod +x turn-on-nodes.sh
$ chmod +x turn-off-nodes.sh
$ chmod +x listen-for-shutdown.py
$ nano nodes.cfg
```
Edit the [I2C CMB registers](https://docs.turingpi.com/turing_pi/children/i2c_cluster_bus/#power-management) of the worker nodes in `nodes.cfg`.
```bash
# Node #1 (Master)
#0x02
# Node #2 (Worker 1)
0x04
# Node #3 (Worker 2)
0x08
# Node #4 (Worker 3)
0x10
# Node #5 (Worker 4)
0x80
# Node #6 (Worker 5)
0x40
# Node #7 (Worker 6)
0x20
```

Edit the `listen-for-shutdown.py` file and change the constants to your liking. Uncomment `PIN_NO_LED` if you have a power LED.
```python
...
# Power button GPIO pin number (GPIO, not actual)
PIN_NO_BUTTON = 18
# Power LED pin number (GPIO, not actual)
PIN_NO_LED = 17
# Button hold time (s)
HOLD_TIME = 2
# Sleep time between power LED blinks (s)
SLEEP_TIME = 0.5
# Path to turn-off-nodes.sh
SCRIPT_PATH='/home/pirate/git/turing-pi-scripts/turn-off-nodes.sh'
...
```
[Turn on the power LED connected to GPIO 17 at boot](https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md) when the master node is on.

```bash
#/boot/config.txt
...
# Set GPIO17 to be an output set to 1
gpio=17=op,dh
...
```

### Optional
You can also copy the scripts to the bin folder to easily run them from anywhere
```bash
$ sudo cp turn-on-nodes.sh /usr/bin/turn-on-nodes
$ sudo cp turn-off-nodes.sh /usr/bin/turn-off-nodes
$ sudo cp listen-for-shutdown.py /usr/bin/listen-for-shutdown
# Make the turing-pi-scripts
$ sudo mkdir /etc/turing-pi-scripts
# Copy the config file to the /etc/turing-pi-scripts/ directory
$ sudo cp nodes.cfg /etc/turing-pi-scripts/
```

### Enable at boot
Edit `turn-on-nodes.service` file with the installation location of the `turn-on-nodes.sh` script.
```bash
...
ExecStart=/usr/bin/sudo /bin/bash -lc '/home/pirate/git/turing-pi-scripts/turn-on-nodes.sh'
...
```
Edit `listen-for-shutdown.service` file with the installation location of the `listen-for-shutdown.py` script.
```bash
...
ExecStart=/usr/bin/python3 /home/pirate/git/turing-pi-scripts/listen-for-shutdown.py
ExecStop=pkill -f /home/pirate/git/turing-pi-scripts/listen-for-shutdown.py
WorkingDirectory=/home/pirate/git/turing-pi-scripts/
...
```
```bash
# Copy the file
sudo cp turn-on-nodes.service /etc/systemd/system/turn-on-nodes.service
sudo cp listen-for-shutdown.service /etc/systemd/system/listen-for-shutdown.service

# Change the permission of the files
$ sudo chmod 664 /etc/systemd/system/turn-on-nodes.service
$ sudo chmod 664 /etc/systemd/system/listen-for-shutdown.service

# Enable it at start
$ sudo systemctl daemon-reload
$ sudo systemctl enable /etc/systemd/system/turn-on-nodes.service
$ sudo systemctl enable /etc/systemd/system/listen-for-shutdown.service
```
## Test
On the master node:
```bash
# Initial Conditions: All nodes are on and in the ~/git/turing-pi-scripts/ directory.
$ sudo ./turn-off-nodes.sh
# All worker nodes should be off (activity lights should stop blinking).
# Turn on the worker nodes again.
$ sudo ./turn-on-nodes.sh
# Turn off the worker nodes again.
$ sudo ./turn-off-nodes.sh
# Shutdown the master node.
$ sudo shutdown now
# Master node should shut down after a while.
# Press the power button.
# The power LED should come on.
# The master node should power on.
# The worker nodes should also power on (activity lights start blinking).
# Hold the power button for two seconds.
# The power LED should blink a few times.
# Worker nodes should power down.
# Master node should power down after awhile.
# The power LED should turn off.
# Press the power button to turn on all the nodes.
```

## Usage
```bash
# Turn on all worker nodes
$ sudo ./turn-on-nodes.sh
# or
$ sudo turn-on-nodes

# Turn off all worker nodes
$ sudo ./turn-off-nodes.sh
# or
$ sudo turn-off-nodes

# Start listen-for-shutdown.py
$ sudo ./listen-for-shutdown.py
# or
$ sudo listen-for-shutdown
# Hold the power button for two seconds and wait for the power LED to blink
```

## Wiring Diagram
<p align="center"><img src="https://github.com/nicholaswilde/turing-pi-scripts/raw/develop/images/pinout.png">
<br>
  <em>Image created with <a href="https://www.circuit-diagram.org/">Circuit Diagram</a></em>
</p>

## Todo
- [ ] Verify that the node register values are valid.
- [ ] Create install and uninstall scripts and/or deb package.

## Credit
`listen-for-shutdown` is based off of [lihak's](https://github.com/lihak) [rpi-power-button](https://github.com/lihak/rpi-power-button)

## Author
The repository was created in 2020 by Nicholas Wilde.