gosqueeze

KO | EN

gitlite — search

#python #react #typescript #llm #golang #android #machine-learning #linux #cli #vue #security #ios #openai #open-source

(★ 9)

go package for configuring Logitech SqueezeBox receivers

gosqueeze 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Gosqueeze - Squeeze Box Controller
==================================

This package is inspired by the work of Robin Bowes and his Net-UDAP
Perl module. In particular the packet format was deciphered based on his
work.

This module was created specifically for use in the github.com/jcrummy/sbconfig
program, however it is available for use in other contexts as well.

Basics
------

You must specificy a network interface to use for sending broadcast messages. Note
replies are listened for on all interfaces due to limitations in broadcast handling.

// Discover what devices are available on the network
	sbs, _ = gosqueeze.Discover(iface)

// Get information about a specific device
	sbs[0].GetIP(iface)
	sbs[0].GetData(iface)

// Modify a configuration point on the device
	sbs[0].Data.WirelessSSID = "NewSSID"

// Save configuration changes to the device
	sbs[0].SaveData(iface)

Getting the squeeze box setup
-----------------------------
From wiki.slimdevices.com/index.php/SBRFrontButtonAndLED.

To go to setup mode:
1. Press and hold the button for about 3 seconds or until it blinks slow *red* then release it.
2. The LED will go red solid, which means it is booting up. This will take a couple of seconds.
3. The LED will start slowly blinking red, which means it is in setup mode.

gosqueeze

gosqueeze 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

gosqueeze

gosqueeze 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README