firmware-cc2510

KO | EN

gitlite — search

#python #react #typescript #go #android #rust #docker #java #awesome #awesome-list #vue #pytorch #security #open-source

firmware-cc2510

(★ 10)

Firmware for CC2510 based SES-Imagotag labels GU140/GL120

firmware-cc2510 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Imagotag 2.6/2.2 BWR GL120/GU140 hacking

Firmware example for Vusion/SES-Imagotag GL120/GU140, CC2510 based electronic shelf labels. Feel free to make your own based on this.
Still under development and never to be completed. This thing is used as a playground.

[Original repo andrei-tatar/imagotag-hack](https://github.com/andrei-tatar/imagotag-hack)

## Chips used

- [CC2510 - MCU + radio - 8051](../../raw/master/doc/cc2510.pdf)
- [NT3H2111 - NFC](../../raw/master/doc/NT3H2111_2211.pdf)
- [GDEW026Z39 - 2.6" EPD display](../../raw/master/doc/GDEW026Z39.pdf)
- or [GDEW0213Z16 - 2.13" EPD display](../../raw/master/doc/GDEW026Z39.pdf)
- or SE2266FS092 - 2.66" EPD display - no datasheet yet
- or EL026TR3 - 2.66" EPD display - no datasheet yet - similar to SE2266FS092, used in GL440, compatible with all above
- all the displays use [IL0373](../../raw/master/doc/IL0373.pdf) or compatible driver
- [TPS61071 - boost converter](../../raw/master/doc/tps61071.pdf) - used (only?) for white LED 
- [W25X10CL - Winbond 1Mbits NOR SPI flash](../../raw/master/doc/w25x10cl.pdf)

## CC2510 connections

### Port 0
- P0:0 - EPD power enable (active low via a P channel fet)
- P0:1 - EPD CS (SPI interface chip select)
- P0:2 - debug port
- P0:3 - EPD SDI (SPI interface serial data in)
- P0:4 - SDA to NFC chip
- P0:5 - EPD CLK (SPI interface clock)
- P0:6 - SCL to NFC chip
- P0:7 - *not connected*

### Port 1
- P1:0 - NFC VCC (seems to power NFC chip and SPI flash)
- P1:1 - NFC FD (field detection)
- P1:2 - EPD DC (data/command select for display)
- P1:3 - EPD BUSY (detect if display busy)
- P1:4 - SPI flash CS 
- P1:5 - SPI flash CLK
- P1:6 - SPI flahs MOSI
- P1:7 - SPI flahs MISO

### Port 2
- P2:0 - EPD Reset (display reset)
- P2:1 - debug data and white LED
- P2:2 - debug clock and LED boost chip enable (TPS61071)

firmware-cc2510

firmware-cc2510 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

firmware-cc2510

firmware-cc2510 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README