alpicool-esp32-mqtt

KO | EN

gitlite — search

#javascript #hacktoberfest #typescript #go #golang #android #deep-learning #docker #macos #java #windows #vue #ios #open-source

alpicool-esp32-mqtt

(★ 21)

Alpicool fridge to mqtt gateway

alpicool-esp32-mqtt 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# alpicool-esp32-mqtt
Alpicool fridge to mqtt gateway for esp32 boards. Supports basic state readings, setting temperature, turning the fridge on/off and de/activating low power (eco) mode.

## Installation
- This project uses [Platformio](https://platformio.org)
- clone this repo
- edit src/config/config.h
  - you will need BLE address of your fridge
  - run `python ./python/gatt.py` to search all ble devices around. The fridge must not be paired in the mobile app. (this does not work on Mac as Apple does not expose BLE adresses for security (thru obscurity) reasons.)
  - look for the devices with name starting with `A1-`, `AK1-`, `AK2-`, or `AK3-` 
- compile and upload
- ```bash  
  platformio run --target upload --environment esp32dev
  ```
- add to home assistant

```yaml
mqtt:
  climate:
    - name: "Alpicool fridge"
      unique_id: "alpicoolfriddgeuid"
      max_temp: 20
      min_temp: -20
      modes:
        - "off"
        - "cool"
      current_temperature_topic: "tele/alpicool/sensor"
      current_temperature_template: "{{ value_json.f_actual_temperature | round(1, 'floor') }}"
      preset_modes:
        - "eco"
        - "burst"
      preset_mode_command_template: >-
        {% set jsonon = { 'fridge_eco': True } %}
        {% set jsonoff = { 'fridge_eco': False } %}
        {{ jsonon | tojson if value == 'eco' else jsonoff | tojson }}
      preset_mode_state_topic: "tele/alpicool/sensor"
      preset_mode_value_template: >-
        {{ 'eco' if value_json.f_eco == True else 'burst' }}
      preset_mode_command_topic: "tele/alpicool/cmd"
      mode_state_topic: "tele/alpicool/sensor"
      mode_state_template: >-
        {{ 'cool' if value_json.f_on == True else 'off' }}
      mode_command_topic: "tele/alpicool/cmd"
      mode_command_template: >-
        {% set jsonon = { 'fridge_on': True } %}
        {% set jsonoff = { 'fridge_on': False } %}
        {{ jsonon | tojson if value == 'cool' else jsonoff | tojson }}
      power_command_topic: "tele/alpicool/cmd"
      payload_on: '{ "fridge_on":true }'
      payload_off: '{ "fridge_on":false }'
      temperature_command_topic: "tele/alpicool/cmd"
      temperature_command_template: '{"fridge_temperature": {{ value }} }'
      temperature_state_topic: "tele/alpicool/sensor"
      temperature_state_template: "{{ value_json.f_desired_temperature | round(1, 'floor')}}"
      temp_step: 1
      precision: 1

binary_sensor:
    - name: "Fridge On"
      unique_id: "zmkfridgeonoff"
      state_topic: "tele/alpicool/sensor"
      payload_on: true
      payload_off: false
      value_template: "{{ value_json.f_on }}"
    - name: "Fridge Eco Mode"
      unique_id: "zmkfridgeecomode"
      state_topic: "tele/alpicool/sensor"
      payload_on: true
      payload_off: false
      value_template: "{{ value_json.f_eco }}"

sensor:
    - name: "Fridge Set Temperature"
      unique_id: "zmkfridgessettemperature"
      state_topic: "tele/alpicool/sensor"
      suggested_display_precision: 0
      unit_of_measurement: "°C"
      value_template: "{{ value_json.f_desired_temperature }}"
    - name: "Fridge Temperature"
      unique_id: "zmkfridgetemperature"
      state_topic: "tele/alpicool/sensor"
      suggested_display_precision: 0
      unit_of_measurement: "°C"
      value_template: "{{ value_json.f_actual_temperature }}"
    - name: "Fridge Voltage"
      unique_id: "zmkfridgevoltage"
      state_topic: "tele/alpicool/sensor"
      suggested_display_precision: 2
      unit_of_measurement: "V"
      value_template: "{{ value_json.f_voltage | round(2, 'floor') }}"

```

## Credit
This is based on [@johnelliott](https://github.com/johnelliott)'s [alpicoold](https://github.com/johnelliott/alpicoold) implementation in Go.

Thanks to [@klightspeed](https://github.com/klightspeed) for reverse engineering the protocol and documenting the BLE names.

alpicool-esp32-mqtt

alpicool-esp32-mqtt 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

alpicool-esp32-mqtt

alpicool-esp32-mqtt 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README