gslX68X

KO | EN

gitlite — search

#javascript #typescript #golang #go #android #machine-learning #deep-learning #macos #nodejs #awesome #awesome-list #pytorch #ios #open-source

(★ 26)

Kernel space driver for Silead touch screen digitizers.

gslX68X 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# gslX68X
Kernel space driver for Silead touch screen digitizers. Forked from Robert Dolca's driver originally posted to [lkml](https://lkml.org/lkml/2015/8/25/738).

## Compilation
First you should get your kernel headers and build dependencies. Assuming debian based operating systems like Ubuntu
```
sudo apt-get install kernel-headers-$(uname -r)
sudo apt-get build-dep linux-image-$(uname -r)
```
Then you can simply fetch this repository and compile it using
```
sudo apt-get install -y git
git clone https://github.com/sigboe/gslX68X.git && cd gslX68X
make
```

## Firmware
You will need to place a firmware file at `/lib/firmware/[hid].fw` where you replace [hid] with the lower case hardware ID of your device.
In most cases, this is `mssl1680` or the exact part name such as `gsl1680`, `gsl1688`, `gsl3670`, `gsl3675` or `gsl3692`.

If `mssl1680.fw` does not work, watch the `dmesg` output for a message similar to this one:
```
[    5.124400] silead_ts i2c-MSSL1680:00: Direct firmware load for mssl1680.fw failed with error -2
```
This inidicates that the firmware should be named `mssl1680.fw`.

Firmware for some devices can be obtained from [gsl-firmware](https://github.com/onitake/gsl-firmware).
You can also find conversion tools there to create your own firmware image from Windows or Android drivers.
Note that `silead.ko` requires firmware in 'plain' format.

## Using the driver
You can start using the driver by `sudo insmod silead.ko` in the working directory where you compiled the driver.

In most cases, some calibration is required before the driver produces accurate results.
Use [xinput_calibrator](https://www.freedesktop.org/wiki/Software/xinput_calibrator/) for this purpose.

## Installation
To install the driver permanently, type `sudo make install`. This will copy the `silead.ko` to `/lib/modules/<kernel version>/kernel/drivers/input/touchscreen`. You may have to run `sudo update-initramfs -k all -u` or similar afterwards to update the initial ramdisk.

gslX68X

gslX68X 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

gslX68X

gslX68X 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README