OctoPrint-SmartABL

KO | EN

gitlite — search

#typescript #go #macos #java #windows #awesome #cli #kubernetes #awesome-list #security #ios #mcp #openai #open-source

OctoPrint-SmartABL

(★ 13)

Plugin designed to expedite your 3D printing process. It smartly reduces unnecessary Auto Bed Leveling (ABL) actions

OctoPrint-SmartABL 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# SmartABL
Plugin designed to expedite your 3D printing process. It smartly reduces unnecessary
Auto Bed Leveling (ABL) actions, letting you focus on what's important –
your prints, not the prep time. Compatible with a wide array of 3D printing firmwares,
SmartABL is perfect for anyone looking to enhance their printing efficiency,
from hobbyists to professionals.

## How it works?
The plugin reads `ABL_CMD`1 from your print file and check the bed mesh
in memoryM.
- If mesh is updated, `M420 S1`M is sent in order to load bed mesh from memory.
- If mesh is outdated or doesn't exist, `ABL_CMD` is sent in order to generate a new mesh.
On Marlin, `M500` is also sent to save the mesh on the eeprom.

> 1: `ABL_CMD` can be `G29` (Marlin/Prusa-buddy), `G80` (Prusa)
> or `BED_MESH_CALIBRATE` (Klipper). This can be customized in SmartABL settings.

> Warning: Prusa and Klipper require at least 1 ABL to track the state.

> Note: By default, the standard ABL command for each firmware triggers SmartABL algorithm,
> however, you can customize this behaviour in settings: the command that triggers the algorithm, the command sent
> to the printer or even ignore commands.

References:
- [G29M,B](https://marlinfw.org/docs/gcode/G029.html)
- [M420M,B](https://marlinfw.org/docs/gcode/M420.html)
- [M500M](https://marlinfw.org/docs/gcode/M500.html)
- [G80P](https://reprap.org/wiki/G-code#G80:_Mesh-based_Z_probe)
- [G81P](https://reprap.org/wiki/G-code#G81:_Mesh_bed_leveling_status)
- [BED\_MESH\_CALIBRATEK](https://www.klipper3d.org/Bed_Mesh.html#calibration)
- [BED\_MESH\_OUTPUTK](https://www.klipper3d.org/Bed_Mesh.html#output)

Credits to [Oscar](https://3dprinting.stackexchange.com/a/15953/27154)
for the idea.

## Compatibility
- Marlin (M)
- Prusa (P)
- Prusa-buddy (B)
- Klipper (K)
- Custom*

> *: You can customize the gcode triggering ABL and the gcode sent to the printer
> in settings. Check the setting "Enable SmartABL on unknown firmware" to use not
> detected firmwares.

> Want your firmware to be compatible? Open an Issue on github so we can add it 🙂
>
> Don't forget to upload plugin_SmartABL.log!!

## Setup
Install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html)
or manually using this URL:

https://github.com/scmanjarrez/OctoPrint-SmartABL/archive/master.zip

## Configuration
### Commands
- `@SMARTABLRESET`: Send this command by terminal or gcode to zero the counter.

### Settings panel
**GCODES**
- Trigger custom gcode(s): By default, SmartABL only triggers with the standard ABL
commands, i.e. `G29/G80/BED_MESH_CALIBRATE`. However, you can define here
a list of gcodes that can trigger SmartABl, e.g. macros or non-standard commands.
Default: disabled (G29).

- ABL custom gcode(s): By default, SmartABL sends the standard ABL
commands, i.e. `G29/G80/BED_MESH_CALIBRATE`. However, you can define here
a list of gcodes that will be sent instead, e.g. macros or non-standard commands.
Default: disabled (G29).

- Ignore gcode(s): Define here if you want to skip gcodes. The commands defined here
won't be sent to the printer.
Default: disabled.

**Force bed leveling**
- After `#` days. Default: enabled (1).
- After `#` prints. Default: enabled (5).
- If current print bed temperature is different from last print.
Default: enabled.
- If current print hotend temperature is different from last print.
Default: enabled.

**Extras**
- Take into account failed/stopped jobs in prints counter.
Default: disabled (only successful prints increase the counter).
- Enable SmartABL on unknown firmwares.
Default: disabled.
 > You have to enable and configure <code>Trigger custom gcode(s)</code> and
 > <code>ABL custom gcode(s)</code>. If you don't configure these two settings,
 > SmartABL assumes marlin firmware by default (i.e. G29 read from file and
 > G29 send to printer when ABL is needed)

### Side panel
- **ABL Restricted**: Normal behaviour, the plugin chooses when to trigger ABL
based on your settings.

- **P/FP**: Number of current prints/Number of prints to force ABL.

- **ABL Always**: Ignore settings; the plugin always trigger ABL. Handy when you
need to force-update your mesh.

## Support me
You find this plugin helpful and want to support me?

## Acknowledgement
Thank you [jneilliii](https://github.com/jneilliii) and [foosel](https://github.com/foosel)
for your continuous help!

## License
    OctoPrint-SmartABL  Copyright (C) 2022-2026 scmanjarrez.
    This program comes with ABSOLUTELY NO WARRANTY; for details check below.
    This is free software, and you are welcome to redistribute it
    under certain conditions; check below for details.

[LICENSE](LICENSE)

OctoPrint-SmartABL

OctoPrint-SmartABL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

OctoPrint-SmartABL

OctoPrint-SmartABL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README