ha-typhur-sync-gold-ble

KO | EN

gitlite — search

#proxy #privacy #anthropic #ai-agents #devops #containers #php #open-source #machine-learning #animation

ha-typhur-sync-gold-ble

(★ 9)

Home Assistant custom integration for Typhur Sync Gold Bluetooth meat thermometers

파일 탐색기

ZIP 다운로드

- en.json
.gitignore
__init__.py
binary_sensor.py
client.py
config_flow.py
const.py
coordinator.py
diagnostics.py
entity.py
hacs.json
LICENSE
manifest.json
models.py
parser.py
README.md
sensor.py
strings.json
ZSTANDARD_ISSUE.md

# CDN으로 사용하기

jsDelivr

jsDelivr는 공개 GitHub 리포지토리를 별도 설정 없이 CDN으로 즉시 서빙합니다. 버전과 파일을 고르면 웹페이지에 바로 붙일 수 있는 링크와 예시 코드가 만들어집니다.

버전

파일

링크

예시

# 프로젝트 배지

GitHub Release 바로가기
License 바로가기

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

A Home Assistant custom integration for **Typhur Sync** Bluetooth meat thermometers.

## Supported Devices

| Model | Device Type | Probes | Tested |
| :--- | :---: | :---: | :---: |
| Sync One | WT01 | 1 | Yes |
| Sync Dual | WT03 | 2 | Yes |
| Sync Gold Quad | WT04 | 4 | No |
| Sync Gold Dual | WT05 | 2 | Yes |
| Sync Gold Lite | WT10 | 1 | Yes |

## Entities

### Base Station

### Per Probe

## Requirements

- Home Assistant 2024.1+
- Bluetooth adapter or proxy within range of the base station

## Installation

### HACS (Recommended)

1. Open HACS → Integrations → ⋮ → Custom repositories
2. Add `https://github.com/miguelcaravantes/ha-typhur-sync-gold-ble` as a **Integration**
3. Install, restart Home Assistant
4. Add integration via Settings → Devices & Services → Add Integration → **Typhur Sync Gold BLE**

### Manual

```bash
cd /config/custom_components
git clone https://github.com/miguelcaravantes/ha-typhur-sync-gold-ble.git typhur_sync_gold_ble
```

Restart Home Assistant, then add the integration via Settings → Devices & Services.

## Bluetooth Range

This integration communicates with the base station over **Bluetooth Low Energy (BLE)**. For reliable connectivity:

- **Keep the base station close** to your Home Assistant server or Bluetooth adapter (within ~10 meters / 30 feet, with minimal walls).
- If the base station is too far or behind walls/obstacles, use a **[Bluetooth Proxy](https://esphome.io/components/bluetooth_proxy/)** via ESPHome to extend BLE range.

### Setting up a Bluetooth Proxy

1. Flash an ESP32 device with [ESPHome](https://esphome.io)
2. Add the `bluetooth_proxy` component to your ESPHome config:

```yaml
bluetooth_proxy:
  active: true
```

3. Add the ESP32 to Home Assistant via the ESPHome integration
4. The proxy will automatically extend Bluetooth coverage to the base station

## How It Works

1. The integration discovers the base station via BLE advertising (name prefix `Typhur-*` or `TM-*`)
2. Connects and performs DH key exchange authentication with the device
3. Requests full status via encrypted BLE commands
4. Parses the status payload (zstd-compressed) and exposes all readings as HA entities
5. Refreshes data every 5 minutes

## Troubleshooting

## Acknowledgements

Special thanks to [@zuyan9](https://github.com/zuyan9) for his work on Typhur device integrations — while targeting different models from the same manufacturer, his implementations were a valuable reference for understanding how to connect to the API.

## License

MIT

ha-typhur-sync-gold-ble

파일 탐색기

# CDN으로 사용하기

# 프로젝트 배지

Was this content helpful?

Recent Feedback

Download README