home-assistant-integration

KO | EN

gitlite — search

#javascript #llm #golang #android #deep-learning #linux #macos #windows #cli #kubernetes #vue #security #pytorch #mcp

home-assistant-integration

(★ 9)

The official my-PV Home Assistant integration

home-assistant-integration Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Official my-PV Home Assistant integration

## Introduction

The **my-PV** integration is used to integrate with the devices of [my-PV](https://www.my-pv.com/). my-PV produces functional and innovative solutions for housing technology powered by solar electricity.

We are working on bringing this integration into Home Assistant Core. Until that is done this custom integration contains all the functionality that will be in the Core integration.

We're looking forward to hear your experience with the integration, please [create an issue](https://github.com/my-PV/home-assistant-integration/issues) with your feedback and findings.

## Supported devices

The following devices are supported by this integration:
- AC ELWA 2
- AC•THOR range
- HEA•THOR IoT
- SOL•THOR

You need **Home Assistant 2026.5** or later for this integration.

## Unsupported devices

The following devices are not supported by the integration:
- ELWA immersion heater
- WiFi Meter

## Installation

Click the following button to install the integration directly on your Home Assistant.

[![Install official my-PV integration.](https://my.home-assistant.io/badges/config_flow_start.svg)](https://my.home-assistant.io/redirect/hacs_repository/?owner=my-PV&repository=home-assistant-integration&category=integration)

You need HACS installed to make the button work.

### Manual installation

- Copy the `custom_components/my_pv` directory of this repository into the
`config/custom_components/` directory of your Home Assistant installation
- Restart Home Assistant

## Configuration

**my-PV** can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

- Browse to your Home Assistant instance.
- Go to [**Settings > Devices & services**](https://my.home-assistant.io/redirect/integrations).
- In the bottom right corner, select the [+ Add Integration](https://my.home-assistant.io/redirect/config_flow_start?domain=my_pv) button.
- From the list, select **my-PV**.
- Follow the instructions on screen to complete the setup.

### Login to my-PV

Host: The IP address of your my-PV device. You can find it in your router or in the device's web interface.  
Password: Password or device key of your my-PV device.

Older firmware versions of the my-PV hardware do not require a password, this will be added by upcoming firmware updates. When no custom password is set you have to use the **devicekey** which can be found under the ⓘ info menu of your my-PV device. For the HEA•THOR IoT you can find the **devicekey** on the device label.

You can update the password through the web interface of your **my-PV** device.

## Data updates

The **my-PV** integration polls data every 5 seconds.

home-assistant-integration

home-assistant-integration Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

home-assistant-integration

home-assistant-integration Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README