porygon

KO | EN

gitlite — search

#python #hacktoberfest #llm #go #golang #deep-learning #linux #docker #java #windows #kubernetes #awesome-list #ios #open-source

(★ 23)

Programmatic input to the JoyCon, with example script for Pokemon Let's Go

porygon 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Porygon consists of two parts: a digital circuit that is wired between a RasPi and a JoyCon, as well as a script
to run that circuit.

For a video of it in action, and some tips on how to put this together, see the announcement post at 
https://invoked.net/2019-03-26-joycon-circuit/

# Circuit

* [A circuit diagram](docs/circuit.png?raw=true)
* [An example implementation](docs/breadboard.jpg?raw=true)

The parts listed in the circuit:

| Component | Link | Function |
| :------ |:--- | :--- |
| PI-IO | [raspi](https://www.raspberrypi.org/products/raspberry-pi-1-model-b-plus/) |Array of GPIO pins on the raspi, used to toggle analog switches and to drive an I2C bus.| 
| DG333A Analog Switch (x2)| [digikey](https://www.digikey.com/product-detail/en/DG333ADJ-E3/DG333ADJ-E3-ND/2621669?utm_campaign=buynow&WT.z_cid=ref_octopart_dkc_buynow&utm_medium=aggregator&curr=usd&site=us&utm_source=octopart) | Single Pole, Double Throw switches. To bridge points to COL, emulating a button press.| 
|MCP4725 (x2)| [sparkfun](https://www.sparkfun.com/products/12918)| Digital Analog Converters. The pi sends a signal here to output a variable voltage, which will emulate what the joystick does. I bought breakout boards instead of the chip itself to make soldering easier.|

# Script

To actually get the inputs going, you'll need shell access to the PI in your circuit. Then,

```bash
git clone https://github.com/moribellamy/porygon.git
cd porygon
python3 -m virtualenv venv
. venv/bin/activate
pip install -r requirements.txt
```

If your circuit diagram varies from the one documented here, there are some settings you can put in
`config.ini`. This is if you didn't use the same pin numbers on your PI GPIO array, or if your
power source isn't a clean five volts.

Then you are in control!

```python
from porygon import *
import time

tilt_x(100)  # Go left a while!
time.sleep(1)
still()  # Zero out the joystick.

press(A)
press(X)  # And so forth.
```

For an example end to end script, which takes input from a webcam, read `pokemon_lets_go.py`.

# Development

More games and automations could be added. Use `py.test` to run all of the tests.

porygon

porygon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

porygon

porygon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README