Wireless-ATEM-Tally

KO | EN

gitlite — search

#javascript #hacktoberfest #llm #go #machine-learning #linux #docker #nodejs #awesome #cli #awesome-list #security #mcp #open-source

Wireless-ATEM-Tally

(★ 10)

A Wireless (or wired) tally system for Blackmagic's ATEM vision mixers built upon Arduino Ethernet and Xbee's based upon the Skarhooj code.

Wireless-ATEM-Tally 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Wireless-ATEM-Tally
===================

A Wireless (or wired) tally system for <a href="http://www.blackmagicdesign.com/products/atem/">Blackmagic's ATEM vision mixers</a> built upon Arduino Ethernet and Xbee's based upon the <a href="http://skaarhoj.com/">Skaarhoj</a> code. Developed by <a href="http://jonasbengtson.se">coral</a>.

For the first revision of this Tally system you will need the following:

Coordinator (the one interfacing with the ATEM and converting it to wireless): 
1 x <a href="http://arduino.cc/en/Main/ArduinoBoardEthernet">Arduino Ethernet</a> 
1 x <a href="http://arduino.cc/en/Main/ArduinoWirelessProtoShield">Xbee Shield of your choice</a> 
1 x <a href="http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-zb-module#overview">Xbee Pro</a> (i used S2B RP-SMA) with ZigBee AT Coordinator firmware uploaded (Set to broadcast with <a href="http://www.digi.com/support/productdetail?pid=3352">X-CTU</a>, more info about <a href="https://sites.google.com/site/xbeetutorial/xbee-introduction/zigbee_setup">setting Xbee to broadcast here</a>).

Client (for each client): 
1 x <a href="http://arduino.cc/en/Main/ArduinoBoardUno">Arduino USB</a> 
1 x <a href="http://arduino.cc/en/Main/ArduinoWirelessProtoShield">Xbee Shield of your choice</a> 
1 x <a href="http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-zb-module#overview">Xbee Pro</a> (i used S2B RP-SMA) with ZigBee AT Router firmware uploaded. 
1 x Red LED (for program indication) 
1 x Green LED (for preview indication) 
 
TODO: 
Switch to API mode to use the XBees builtin output to minimize the client cost. 
Actually write the client.
 
GPL licensed: 
To cite <a href="https://github.com/kasperskaarhoj/Arduino-Library-for-ATEM-Switchers">Kasper</a> from his own project: 
"The library is licensed under <a href="http://www.gnu.org/licenses/gpl.html">GNU GPL v3</a>. It allows you to use the library for any project, even commercial ones, as long as you keep the code using the library open - and deliver a copy to your client. In other words, even though you might deliver a black box hardware device, you still must give your client a copy of the Arduino sketch you have uploaded to the board. And who knows; either they will improve your product, maybe do nothing at all - or mess it up so you can sell some support hours. :-)" 
<img src="http://www.rixrecords.com/IMG/8140798.jpeg" alt="Klaus Wunderlich">

Wireless-ATEM-Tally

Wireless-ATEM-Tally 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Wireless-ATEM-Tally

Wireless-ATEM-Tally 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README