KBDParts
3d printed keyboard cases, keycaps and sundries
파일 탐색기
최종 버전 다운로드 (.zip)- BootMapperClient.zip
- JigOn_170419.zip
- L3_170419.zip
- L3_171209.zip
- L3_bootloader.zip
- Leeku_L3_Software.pdf
- BootmapperClient.zip
- OddForge VE.A.zip
- ps2avrGB4U_firmware_V1.4.1_190417.zip
- ps2avrGB4U_firmware_V1.5.0_190822.zip
- ps2avrGB_firmware_V1.4.1_190417.zip
- ps2avrGB_firmware_V1.5.0_190822.zip
- ps2avrGB_rgb_controller_0xb0.hex
- ps2avrGB_rgb_controller_0xb8.hex
- ps2avrGB_rgb_controller_20200412.zip
- leeku_l3_tkl_default.hex
- leeku_l3_tkl_via.hex
- leeku_lz_clsm_default.hex
- leeku_lz_clsm_via.hex
- leeku_lz_ergo_default.hex
- leeku_lz_ergo_via.hex
- leeku_lz_st_default.hex
- leeku_lz_st_via.hex
- l3_tkl.json
- lz_clsm.json
- lz_ergo.json
- Lz_St.json
- oddforge_vea.json
- eeprom_reset.hex
- README.md
- BotConnector.stl
- BotLeft.stl
- BotRight.stl
- Bottom Connector.stl
- Bottom Left.stl
- Bottom Right.stl
- Bottom.step
- Bottom.stl
- PCB.dxf
- Plate.dxf
- Plate.stl
- PlateConnector.stl
- PlateLeft.stl
- PlateRight.stl
- Top Connector 1.stl
- Top Connector 2.stl
- Top Left.stl
- Top Right.stl
- Top.step
- Top.stl
- Weight.step
- Weight.stl
- Wrist-left.stl
- Wrist-right.stl
- wrist.step
- wrist.stl
- Bottom Left.step
- Bottom Right.step
- Bottom-Left.stl
- Bottom-Right.stl
- Dolphin_Bottom.step
- Dolphin_Bottom.stl
- Top Left.stl
- Top Right.stl
- Planck.stl
- Prime_E_Rev2_PCB v1.stl
- Prime_Em.7 v4.step
- Prime_Em.7_Bottom.step
- Prime_Em.7_Bottom.stl
- Prime_Em.7_Bottom_Left.stl
- Prime_Em.7_Bottom_Right.stl
- Prime_Em.7_Plate.step
- Prime_Em.7_Plate.stl
- Prime_Em.7_Plate_Left.stl
- Prime_Em.7_Plate_Right.stl
- Prime_Em.7_Top.step
- Prime_Em.7_Top.stl
- Prime_Em.7_Top_Left.stl
- Prime_Em.7_Top_Right.stl
- ALPS_Plate.dxf
- bottom-left.f3d
- bottom-left.stl
- bottom-right.f3d
- bottom-right.stl
- plate-left.stl
- plate-right.stl
- Tent1.stl
- Tent2.stl
- top-left.f3d
- top-left.stl
- top-right.f3d
- top-right.stl
- 300x55x20.stl
- README.md
- 100u.stl
- 100u.stl
- CherryStemFDMSingle.stl
- 100u.3mf
- 100u.stl
- 125u.3mf
- 125u.stl
- 150u.3mf
- 150u.stl
- 175u.3mf
- 175u.stl
- 200u.3mf
- 200u.stl
- 225u.3mf
- 225u.stl
- 250u.3mf
- 250u.stl
- 275u.3mf
- 275u.stl
- DSA_Skull.3mf
- DSA_Skull.stl
- Shift.stl
- 100U.stl
- 125U.stl
- 150U.stl
- 175U.stl
- 200u.stl
- 225U.stl
- 250U.stl
- 275U.stl
- Tops.3mf
- Tops.stl
- 175u.stl
- A.stl
- B.stl
- C.stl
- D.stl
- E.stl
- Enter & Shift.stl
- F.stl
- G.stl
- H.stl
- I.stl
- J.stl
- K.stl
- l.stl
- M.stl
- N.stl
- O.stl
- P.stl
- Q.stl
- R.stl
- S.stl
- T.stl
- U.stl
- V.stl
- W.stl
- X.stl
- Y.stl
- Z.stl
- Tops.3mf
- Tops.factory
- Tops.stl
- 100u.stl
- 100u.3mf
- 100u.stl
- Arrow.3mf
- arrow.stl
- Body1.stl
- Del.stl
- g20Ish.3mf
- g20Ish.stl
- GH.3mf
- GH.stl
- Keys.3mf
- SA_R3_v3.stl
- CherryStem.stl
- CherryStemFDM.stl
- README.md
- EK_Switch_Hitter_Installer_v1.0.msi
- README.md
- ansi_60_left.stl
- ansi_60_right.stl
- plate_60_ansi.dxf
- plate_60_pure.dxf
- Pure_60_Left.stl
- pure_60_right.stl
- cls_half.dxf
- CLS_MX-PLATE-V2(share).dxf
- CLS_MX-PLATE-V3(share).dxf
- CLS_sh-MX-Plate-universal(share).dxf
- CLSsh-AC-diffuser-(share).dxf
- Default_60.dxf
- Pure_60.dxf
- Pure_60.stl
- pure_60_left.stl
- pure_60_right.stl
- ALPS_Plate.dxf
- plate-left.stl
- plate-right.stl
- README.md
- LICENSE
- README.md
// repository documentation
Was this content helpful?
(0 ratings)