EMC2301

KO | EN

gitlite — search

#javascript #python #go #machine-learning #deep-learning #linux #docker #macos #java #windows #vue #awesome-list #mcp #open-source

(★ 9)

Software for controlling an EMC2301 via i2c and other standards.

EMC2301 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# EMC2301
Software for controlling an EMC2301 via i2c and other standards.

For use with Raspbery Pi using Linux type operating systems.

Download files, navigate to downloaded directory, run `sudo make -j 8`.

Two commands are currently supported, `rpm` and `set`. `rpm` will print what the fan is doing to the terminal, `set` along with a value (0-255) will set the fan to that step value.

Examples:

`./main rpm` <<< Reads what the chip/fan is doing
```
USE_DEV_LIB 
Current environment: Raspbian
DEV I2C Device
DEV I2C Device
I2C ok !
End Res_value: 437
FAN_SPEED: 8998
---------------------
```
`./main set 255` <<< Sets the chip/fan to maximum
```
USE_DEV_LIB 
Current environment: Raspbian
DEV I2C Device
DEV I2C Device
I2C ok !
Setting fan to: 255
End Res_value: 508
FAN_SPEED: 7740
---------------------
```

This is nothing fancy. There is no GUI. There is no automatic temp-fan control. It is command line only to quickly read or set the fan speed of a raspberry pi, nothing else.

Have fun, I'm not responsible for what you do to your own stuff running this code. (But if something sets itself on fire, send me a video of it as it'll be epic.)

(May work with nvidia jetson as well as over SPI and/or GPIO, don't know, haven't tested it, but it seems the waveshare backend has support for it.)

EMC2301

EMC2301 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

EMC2301

EMC2301 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README